The Anycubic i3 Mega 3D Printer is another 3d printer that sells under the 300-pound mark and claims the top spot. If you’re looking for a cheaper model that’s smooth, quick and precise, then this 3d model might take your fancy. But, first read our review of this machine to fully understand the benefits, tech and its ability to produce a quality print!
At 3D Junkie, we love trying new machines and putting them through our tests so we can share our reviews with our readers. But, because this machine receives a mixture of positive and negative reviews, we would like to put the record straight!
Who Is Behind The Anycubic i3 Mega 3D Printer
The Anycubic brand has a long history of producing and selling machine accessories and 3D Printers. They have a wide selection of different machines some high spec machines that we have tried in the past! They are a Chinese company that sells their products all over the world. Selling everything from motherboards to fillers, inks and spare parts!
The Anycubic i3 Mega 3D Printer
Although we have listed the Anycubic i3 Mega 3D Printer in 4th position on our best 3D printers of all time! We still think this product should not be ignored!
It, not a huge machine, easy to assemble. But, make sure you take your time with this one because it comes in many delicate parts that need your attention when setting up!
It provides you with a touch screen that’s very sensitive! It can print large molds 210 x 210 x 205m that are easy to remove because it provides a heated base (Ultrabase) new tech!
One good point to make about this machine is it comes with spare parts, although this is rare for a 3D printer because these parts are not cheap! Hopefully, it’s not a sign of things to come after a few months of use!
- It delivers an excellent print for a low priced machine
- Works great no matter what material you are using
- The instruction manual is simple and great for beginners
- Restart print even after power outages
- Heated base using the new tech (Ultrabase)
- Touchscreen (little too sensitive)
- Spare parts included
- Cables can be tricky to connect (we advise you tape or cable tie)
- Lose wires even after assembled
- Bit noisy, after warming!
- Filament provided was low quality!
The Techie Stuff!
The Anycubic i3 Mega 3D Printer was released back in 2017 and has not received any upgrades as of yet! So, keep a lookout for new upgrades being released shortly! If your looking for all the techie stuff then all is revealed below:
- Single extruder (Fused Deposition)
- Manufacturer: Anycubic
- Print Sizing: 210 x 210 x 205mm
- Weight: 16.2 Kg
- Pricing: 260 – 300
- User feedback: Good
- 50 microns Layer Resolution
- Nozzle Diameter: 0.4 mm/1.75mm
- Heatbed Temp: 100C
- Full Dimensions: 410 x 475 x 458mm
Apart from the few kinks, we experienced with the Anycubic i3 Mega 3D Printer our review of this machine is good. For a 300 price tag you will not get a product with this size and quality from any new machine currently being sold on the market.
Our main issue was with the plate not heating up, and when it did after a few tries the temp was not good enough! But, this might of been a fault with the model we were using!
The touchpad was also very sensitive, so be careful when entering your settings. One other complaint about this model was the wires not being attached and were hanging. Just use a cable tie if this becomes an issue with you! But apart from the complaints its quiet, sturdy and produces a fantastic print.
We had it print some very delicate moulds, and it passed these tests very well. For a price tag under £300, we give this 3D printer the thumbs up from 3D Junkie!
Happy Printing 🙂
Anycubic i3 Mega 3D Printer Breakdown 300
Product Name: Anycubic i3 Mega 3D Printer
Product Description: The Anycubic i3 Mega 3D Printer is a serious piece of kit! For around £300 you get great moulds for a fraction of the price compared to other 3D printers!
Offer price: 300
Offer URL: https://3djunkie.com/anycubic-i3-mega-3d-printer-review/
Valid until: 2025-01-16